Upon application of power the timer resets, enters the ON state for a period T1, then switches OFF for a period T2. This cycle repeats until power is removed.
Type – 730 Series
Input – Screw Terminal
Output – Screw Terminal
Order Ref. – See Datasheet for Specific Model
Upon application of power the timer resets, enters the ON state for a period T1, then switches OFF for a period T2. This cycle repeats until power is removed.
| Timing Scale | T1 Time – Model Specific |
|---|---|
| Supply Voltage | Multi or Fixed Voltage Options Available (AC & DC) |
| Current Consumption | 4mA Max. |
| Operating Temp. | -10 to +60°C |
| Switch Capacity | 1 Amp. |
| Inrush Current | 10 Amps for 10mSec |
| Switching Holding Voltage | 400V |
| Duty Cycles | 100% |
| Input | Screw Clamp Terminals |
| Timing Temp. Coefficient | + or – 0.005% °C |
| Scale Accuracy | + or -10% |
| Reset/ Test | Manual Touch Switch |
| Printed Circuit Board | UL 94V0 |
| Repeat Accuracy | + or – 1% |
| Indicators | LED’s to indicate phases |
| Design Standard | VDE 0110C |
| Output | Screw Clamp Terminals |
